Guides & How to's
How do I know what material to order?
Choosing the best material for your packaging can sometimes be difficult! Don't worry! During your consultation stage with our product specialists, we will help determine the best material for your product even if you have already chosen a material ...
How do I determine what size box I need?
To determine the correct box size you need, measure your product left to right (length), front to back (width) and bottom to top (depth). Add 1/8" - 1/4" to each dimension to give a little bit of wiggle room to your product!
What are the artwork submission requirements?
For optimal printing results, please refer to the artwork submission guidelines outlined in the link below. All artwork must be set up as CMYK for print with a 1/8" bleed. All fonts must be outlined to prevent being replaced by a default font, and ...
How should packaging dimensions be measured?
Depending on the type of packaging you ordered, the way to measure the correct dimensions for your packaging may differ. However, all measurements are always measured using Length, Width, and Depth. Rigid & Corrugated Packaging Due to the nature of ...
How do I place my artwork on the dieline you provided?
To correctly place your artwork on the dieline we provided you, we recommend you to stop by our comprehensive artwork & design guideline. If you still require assistance after going through our guidelines, you can alternatively contact your ...
How do I prepare my files for print?
When you receive your custom dieline, there are some guidelines and recommendations to follow to ensure your packaging prints out crisp, clean, and aligned. Failing to follow these guidelines and recommendations will potentially result in misprinting ...
Avoid using small elements
In print, the colours of the CMYK space consist of four colours applied separately. Small-sized elements can be printed out of focus. Large elements give the best results.It’s crucial that the minimum height of the text is 8 points. Otherwise, it ...
Popular Articles
What is your minimum order quantity?
Our MOQs (minimum order quantity) is optimized to benefit the customer by on the cost of tooling and setup for our factories to produce your custom packaging. Since these MOQs are based cost optimization for our customers, it is not recommended to go ...
How do I get a quote?
We want to accommodate your needs as best as we can! Therefore we offer a few easy ways for you to request a quote from us. Contacting us directly All direct lines of contacts are available Monday - Friday @ 9:00am - 6:30pm EST. During offline hours, ...
How do I determine what size box I need?
To determine the correct box size you need, measure your product left to right (length), front to back (width) and bottom to top (depth). Add 1/8" - 1/4" to each dimension to give a little bit of wiggle room to your product!
How do I place a reorder?
To initiate a reorder, kindly establish communication with your assigned Product Specialist, who assisted you during your initial order placement. Alternatively, you can direct any inquiries regarding reordering to sales@pakfactory.com, where a ...
Do you have volume discounts or price breaks?
Yes, we do! High-quantity orders generally net a lower cost-per-unit (higher quantity = bulk savings) on all of our packaging orders. If you have any questions about pricing or how you can get greater savings on your packaging, you may consult with ...